Excellent Condition ~ INGERSOLL RAND NVC700 Air Dryer,700 cfm,230 psi,460V,3PH

Description

Ingersoll Rand Air Dryer, Model NVC700A40N, Serial Number WCH1010462, Power 460 Volts / 60 Hertz / 12.6 Amps / 3 Phase
Description
Compressed Air Dryer, Max. Flow - Air Treatment 700 cfm, Max. Air Compressor HP 150 hp, Max. Inlet Temp. - Air Treatment 120 Degrees F, ISO Class - Air Treatment 4, Input Voltage - Air Treatment 460V AC, Phase - Air Treatment 3, Connection Size - Air Treatment 3 in NPT, Max. Incoming Pressure - Air Treatment 230 psi, Dew Point 38 Degrees F, 20 A Full Load Amps, Power 5.79 kW, Max. Ambient Temp. 113.
Air Capacity (scfm at 38°F)
700
Pressure Drop (psig)
2.7
Operating kW Air cooled/water cooled
5.79/3.58
Refrigerated Cycling Air Dryers
• ISO Class: 4* Max. pressure: 230 psi
Refrigeration compressor turns off during periods of reduced loads to match actual compressed airflow, drawing only the energy required to provide continuous-pressure dew point performance. Unique centrifugal separator allows high moisture separation and removal. Unwanted water from the air is discarded through a timed condensate drain.
FEATURES
Lower Energy Consumption:
Operates only when required by load demand reducing energy use
Reliable Moisture Removal:
Centrifugal separation pulls unwanted moisture from the air and removes it through a reliable float-type or timed electric solenoid drain
High-Quality Air:
Thermal mass with submerged evaporator is fully insulated to maintain a cold well of propylene glycol-water to provide continuous ISO Class 4 quality air with 38°F dew point
Efficient Operation:
Corrosion-resistant stainless steel heat exchanger design provides optimal heat transfer, ensuring low pressure dew point and low pressure drop
Total Control:
Automatic controls reduce energy draw by shutting down the refrigerated compressor as quickly as possible, while maintaining continuous performance
Technical Specs
Item - Refrigerated Air Dryers
Refrigerated Compressed Air Dryer
Max. Flow - Air Treatment
700 cfm
Max. Air Compressor HP
150 hp
Max. Inlet Temp. - Air Treatment
120 Degrees F
ISO Class - Air Treatment
4
Input Voltage - Air Treatment
460V AC
Phase - Air Treatment
3
Connection Size - Air Treatment
3 in NPT
Max. Incoming Pressure - Air Treatment
230 psi
Dew Point
38 Degrees F
Full Load Amps
20 A
Power
5.79 kW
Max. Ambient Temp.
113 Degrees F
Refrigerant
R-404A
Refrigeration Compressor HP
4 1/2 hp
Finish
Powder Coated
Heat Exchanger Material
304L Stainless Steel
Overall Height
62 in
Overall Width
42 in
Overall Depth
40 in
Features
Thermal Mass Cycling