Black Heat Shrink 2:1 Tube / Sleeve for Wire, Cable, car, Electrical, wrap

Description

Black Heat Shrink Tube
Heat shrink tube boasts very good flame retardation and it does not contain halogen,
so it will produce no hazardous gases when it is burnt, with low smoke and no drop.
It does not contain heavy metal and conforms to SGS standard.
Item specification:
General purpose polyolefin heat shrink, with a 2:1 shrinkage rate this tube shrinks to half of its diameter.
Stated sizes are internal diameters prior to shrinking.
High quality, cost effective, commercial grade for electrical, electronic, automotive and general industrial markets.
High strength and resilience.
Minimum Shrinkage Temperature ~ +70° C
Full Recovery Temperature ~ +100°C
Operating Temperature ~ -55°C to +125°C
Tensile Strength ~ 14Mpa
Dielectric Strength ~ 20kv/mm
Due to the way heat shrink tube is manufactured it is often a little larger than its stated pre-shrunk size, however the tube will always shrink to 50% of the stated pre-shrunk size.
Safety standard: UL224 VW-1 C-UL CSA C 22.2OFT RoHS
If this item is not suitable for you,
you can check others in our
>>
Shop
<<
WE AIM ON DELIVERING THE BEST POSSIBLE SERVICE
ITEMS ARE SHIPPED FROM EUROPE UNION AND DISPATCHED EVERY WORK DAY !
EUROPE UNION DELIVERY:
MOSTLY DELIVERY IN EUROPE UNION TAKES FROM ONE TO TWO WEEKS!!!
IF YOU DO NOT GET ITEMS BY TWO WEEKS PLEASE DO NOT WORRY.
SOMETIMES SHIPMENTS ARE LATE. WRITE US IF YOU WILL NOT GET
YOUR ITEMS IN A MONTH AND WE WILL SOLVE THE PROBLEM.
PLEASE WRITE US BEFORE LEAVING NEGATIVE FEEDBACK,
BECAUSE YOUR FEEDBACK IS VERY IMPORTANT FOR US
WORLD WIDE DELIVERY:
OTHER COUNTRIES ABOUT ONE MONTH.
IF YOU DO NOT GET ITEMS BY ONE MONTH PLEASE DO NOT WORRY.
SOMETIMES SHIPMENTS ARE LATE. WRITE US IF YOU WILL NOT GET
YOUR ITEMS IN A 40 DAYS AND WE WILL SOLVE THE PROBLEM.
PLEASE WRITE US BEFORE LEAVING NEGATIVE FEEDBACK,
BECAUSE YOUR FEEDBACK IS VERY IMPORTANT FOR US
HAVE A NICE PURCHASING!
Heat shrink tube boasts very good flame retardation and it does not contain halogen, so it will produce no hazardous gases when it is burnt, with low smoke and no drop. It does not contain heavy metal and conforms to SGS standard. General purpose polyolefin heat shrink, with a 2:1 shrinkage rate this tube shrinks to half of its diameter. High quality, cost effective, commercial grade for electrical, electronic, automotive and general industrial markets. Due to the way heat shrink tube is manufactured it is often a little larger than its stated pre-shrunk size, however the tube will always shrink to 50% of the stated pre-shrunk size. ITEMS ARE SHIPPED FROM EUROPE UNION AND DISPATCHED EVERY WORK DAY ! MOSTLY DELIVERY IN EUROPE UNION TAKES FROM ONE TO TWO WEEKS!!! SOMETIMES SHIPMENTS ARE LATE